<![CDATA[Schlage Lock BE469 Z-Wave Connect Touchscreen Deadbolt]]>0_1516382244814_Schlage BE469.jpg

I just installed this Z-Wave deadbolt yesterday. Theatersoft will need some additional command classes support: Door Lock V1, etc. Also TBD - the secure controller requirement...

Z-WaveAlliance.org page

]]>https://community.theatersoft.com/topic/3/schlage-lock-be469-z-wave-connect-touchscreen-deadboltRSS for NodeWed, 20 May 2026 06:42:58 GMTFri, 19 Jan 2018 17:31:11 GMT60<![CDATA[Reply to Schlage Lock BE469 Z-Wave Connect Touchscreen Deadbolt on Fri, 19 Jan 2018 17:31:11 GMT]]>0_1516382244814_Schlage BE469.jpg

I just installed this Z-Wave deadbolt yesterday. Theatersoft will need some additional command classes support: Door Lock V1, etc. Also TBD - the secure controller requirement...

Z-WaveAlliance.org page

]]>https://community.theatersoft.com/post/3https://community.theatersoft.com/post/3Fri, 19 Jan 2018 17:31:11 GMT<![CDATA[Reply to Schlage Lock BE469 Z-Wave Connect Touchscreen Deadbolt on Sat, 20 Jan 2018 05:45:03 GMT]]>My BE469 is now connected. It's mapped to an OpenSensor type and the alarm class values aren't implemented correctly, so there's work to do now.

Note:

The OpenZWave options.xml shows an example NetworkKey as:

  <!-- If you are using any Security Devices, you MUST set a network Key -->
  <!-- <Option name="NetworkKey" value="0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10" /> -->

Add the NetworkKey property and string value to the ZWave config options object without any spaces.

]]>https://community.theatersoft.com/post/4https://community.theatersoft.com/post/4Sat, 20 Jan 2018 05:45:03 GMT<![CDATA[Reply to Schlage Lock BE469 Z-Wave Connect Touchscreen Deadbolt on Tue, 23 Jan 2018 05:45:11 GMT]]>I implemented the Door Lock class and both lock state and control are working correctly.

]]>https://community.theatersoft.com/post/5https://community.theatersoft.com/post/5Tue, 23 Jan 2018 05:45:11 GMT